Saturday, June 18, 2016

Power Tie Coffee and Beer Cozies, FREE Pattern

In keeping with my pattern of posting extremely last minute gift ideas, I have one for Father's Day! My Power Tie Cozies.

This pattern includes designs for a coffee cozy and a beer cozy. The coffee cozy was originally published in Happily Hooked Magazine, and I thought I'd give it a companion piece to share here. The coffee cozy fits most standard cups you get from from your favorite coffee house, and fits on pint glasses, while the beer cozy fits most bottles and cans. Whether your Dad's favorite vice is of the caffeine or alcohol variety, make him a tie he'll actually use!

This pattern whips up quickly, so you really do still have time to make one for Father's Day.



Power Tie Coffee and Beer Cozies



 Materials
  • US H (5 mm) hook
  • Worsted weight cotton yarn in two colors, A and B. Shown (left to right) in Lily Sugar’n Cream in Light Blue and Country Red, Soft Ecru and Country Red, and Light Blue and Barnboard
  • TwistsYarn needle or Large eye blunt needle  

Gauge 
7 sc and 9 rows = 2”

Abbreviations

st(s) : stitch(es)
ch(s): chain(s)
sc: single crochet
hdc: half double crochet
dc: double crochet
sl: slipstitch
inc: increase (crochet two stitches in one space)
dec: decrease (crochet two stitches together)
BLO: back loops only

Special Stitches
Foundation single crochet (used in coffee cozy only): ch 2, insert hook in second ch from hook and pull up a loop. Yarn over and pull through one loop (chain made). Yarn over and pull through both loops. Succeeding stitches are worked into the chain made in the previous stitch.

Notes
1. Starting chains do not count as a stitch. 
2. Pattern is worked in rounds. Do not turn at the ends of rounds unless otherwise noted. For beer cozy only, pattern is worked in a spiral without joining rounds.
3. Repeat directions following * to end of round.

Instructions

Coffee Cozy Shirt

1: With A, leaving a slightly long tail to sew up gap, foundation single crochet 27 and join in a ring. (27)

2:  Ch 1, *sc; join to first sc. (27)

3:  Ch 1, *sc 8, sc inc; join to first sc. (30)

4-5: Ch 1, *sc; join to first sc. (30)

6: Ch 1, *sc 9, sc inc; join to first sc. (33)

7-8: Ch 1, *sc; join to first sc. (33)

9: Ch 1, *sc 10, sc inc; join to first sc. (36)

10-11: Ch 1, *sc; join to first sc. (36)

12: Ch 1, *sc 11, sc inc; join to first sc. (39)

13-14: Ch 1, *sc; join to first sc. (39)     

Begin Collar

1: Ch 1, sc in BLO, sc 3, (sc inc, sc 4) six times, sc inc, sc 3, sc in BLO. (46)
*Note: the tie will be worked into the two unworked front loops.

2: Ch 1, TURN, sc dec, sc 42, sc dec. (44)

3: Ch 3, TURN, dc, hdc, hdc dec, sc 2, (sc dec, sc 4) five times, sc dec, sc 2, hdc dec, hdc, dc, ch 3, sl in same space, ch 2 more and sl in row below. (36, not counting chains)

4: Ch 1, TURN, sl evenly up side edge of collar, in each stitch around, and down opposite edge. Tie off, leaving long tail to stitch down collar edge (enough for a few stitches on each side will do).  

Make Tie – pattern on pg 4


Beer Cozy Shirt

With A, make a magic ring

1: Sc 6 into magic ring. Mark ends of rounds. Work in a spiral; do not join rounds.

2: *Sc inc  (12)

3: *Sc inc, sc (18)

4: *Sc inc, sc 2 (24)

5: *Sc inc, sc 7 (27)

Work even until piece measures 5” laid flat.

Begin Collar

1: Ch 1, sc in BLO, sc 2, (sc inc, sc 3) five times, sc inc, sc 2, sc in BLO. (33)
*Note: the tie will be worked into the two unworked front loops.

2: Ch 1, TURN, sc dec, sc 29, sc dec. (31)

3: Ch 3, TURN, dc, hdc, hdc dec, (sc dec, sc 5,) three times, sc dec, hdc dec, hdc, dc. ch 3, sl in same space, ch 2 more and sl in row below. (25, not counting chains). 

4: Ch 1, TURN, sl evenly up side edge of collar, in each stitch around, and down opposite edge. Tie off, leaving long tail to stitch down collar edge (enough for a few stitches on each side will do).  


Tie (same for both versions)

With B, starting with a very long tail (approx 2 ft), hold cozy upside down and attach yarn in the first unworked front loop from the first round of the collar.

1: Ch 1, sc in same space, sc in the second unworked front loop. (2)

2-3: Ch 1, TURN, sc 2. (2)

4: Ch 1, TURN, sc inc 2 (4)

5-10: Ch 1, TURN, sc 4. (4)

11: Ch 1, TURN, sc dec 2. (2)

12: Ch 1, TURN, sc 2. (2)

13: Ch 1, TURN, sc dec. Tie off, leaving a long tail to sew the tie down to the shirt. (1)

 
Finishing

Shirt (coffee cozy only): Use a yarn needle to stitch up the gap left in the first round, and weave in yarn end.

Tie: With starting yarn tail, wrap yarn around the top 1/2” of the tie, weaving yarn through the back of the stitches with a yarn needle to secure them. Continue wrapping until the “knot” reaches your desired width. Tie off and weave in end. With opposite yarn tail, stitch around the outer edge of the tie to secure it in place. Weave in end.


Collar: Fold collar down. Using yarn needle, stitch down the collar along the two front points, weaving the yarn tail under the tie to reach the opposite side. Weave in end. 
 

Enjoy your Father's Day!


Saturday, June 11, 2016

Yarn Review - Lion Brand Sock-Ease

Awhile back, I posted about knitting my Circus Socks, following the free pattern "Outside In" available on Knitty. The pattern is lovely and I had a lot of fun knitting my socks, but that's only half of the equation. The other half, of course, is the yarn. 


For these socks I used Lion Brand Sock-Ease in the colorway "Circus Peanut" (hence the name of my version). It's a fun color, and I like how a solid shade brings out the raised ridges of the traveling rib. 


The Big Skein

Sock-Ease is sold a little differently than most sock yarns. It comes in larger, 3.5oz/100 gram balls like most worsted weight yarns so that, as the wrapper claims "one ball makes a pair." The full price listed on Lion's site is $10.49 but I paid about $7, making this a pretty budget friendly yarn, which of course I like. I actually had about 30 grams of yarn leftover - 30% of the original ball -  after making these, so it would be possible to knit a longer pair and still only use one skein.

The Material

This is a machine washable yarn (yay!) that's 75% Wool and 25% Nylon, a pretty standard composition for sock yarns. The feel is rather less woolly than other yarns I've used, though, with very little fuzz. It's quite smooth and sleek and feels a bit more summery that other superwash wool yarns. I thought that would make it a good option for me as I live in New Orleans, where "winter" means highs below 70 degrees.

I found the yarn very pleasant to work with, smooth and soft with no splitting or breaking and no fuzz, so it's still nice to work with for summer knitting when you don't want a huge woolly project laying in your lap.

The Wear

The final product is a pair of cozy knit socks that feel nice and soft on the feet. The only issue I've found with the yarn is that it doesn't quite bounce back and retain its stretchiness like I'd hope.

In this photo, I'd been wearing the socks around for a bit and trying them on with different shoes. As you can see, I ended up with some sag at the ankles and also a bit around the top edge just below the ribbing. Though I won't normally be wearing them with high heels, I do worry that over time they'll get saggier and I'll be pulling them up all day.

The Verdict

The price is nice, it's fun to work with, and the texture feels good against the skin. If the regain memory stays the way it is, I'll be pretty happy with this yarn, but it remains to be seen how well the socks will keep their stretch after multiple washings. For a time-intensive item like knitted socks, I'm not sure the little bit of savings is worth potentially saggy socks.

Would I buy it again? Maybe. But, I'm going to wear them through next winter first and see if they hold up or fall down.